Posters COSI 2008

  • Amira Abou-Hamdan, Chemspeed Technologies AG, Augst, Switserland, Preparation of stable latex suspensions in miniaturized tank-reactors
  • Massimiliano Barletta, Universita degli Studi di Roma Tor Vergata, Roma, Italy, Influence of scratch load and speed in scratch tests of bilayer powder coatings
  • Viktor Baukh, Eindhoven University of Technology, Department of Applied Physics, The Netherlands, Imaging of water transport in coatings with nuclear magnetic resonance
  • Jeanette Bennedsen & Juliane Bielenberg, Danish Technological, Institute, Aarhus C, Denmark, Nanobionic Freezing Point Depressing Surfaces – Ice tester
  • Fei Chen, College of Mechanical Engineering of Beijing Institute of Petrochemical Technology, P.R. China, Study on the tribological performance of ceramic coatings on titanium alloy surfaces obtained through microarc oxidation
  • Thanos Dimopoulos, Eindhoven University of Technology, The Netherlands, Pre-emptive Healing of Stresses in Polymer Coatings
  • Catarina Esteves, Eindhoven University of Technology, The Netherlands Cross-linking in PDMS/particulate composite coatings
  • Jiamin Feng, Wuhan University of Technology, P.R. China, Synthesis of CuInS2 quantum dots of TiO2 porous films by solvothermal for absorption layer of solar cells
  • Chiou - Ting Guo, Diwan College of Management, Taiwan, Amorphous hydrogenated carbon coatings on piston pin by ECR-CVD system
  • Amira Abou Hamdan, Chemspeed Technologies AG, Augst, Switserland, Accelerating Formulation R&D by Automated High Output Solutions
  • Marinda Holtkamp, TNO Science & Industry, Eindhoven, The Netherlands, New coating formulations and application technique for functional fabrics
  • Jeong-Pyo Kim, Changwon National University, School of Nano & Advanced Materials Engineering, Korea, Damage Resistance of SiC and Si3N4 Coatings with Control of Microstructure and Phase Proportion
  • Min Tae Kim, Korea Electric Power Research Institute: Materials Engineering Group, Korea, In situ deposition of protective layer using fuel additive and its effect on the oxidation of SM 45 C blades for micro-gas turbine
  • Eric Kircher, Akzo Nobel, The Netherlands, Measuring flake orientations for metallic and pearlescent coatings
  • Wilfred Kleinjan, Eindhoven University of Technology,  The Netherlands, Antimony-doped tin oxide nanoparticles for conductive polymer nanocomposites
  • Kristina Lachmann, Technische Universitaet Braunschweig, Germany, Development of a multifunctional coating system for LMPC
  • Baoshun Liu, Wuhan University of Technology, P.R. China, The fabrication, characterization and photoelectrocatalytic studies of WO3/TiO2 films under the UV and Visible lights
  • Xianchun Lou, Wuhan University of Technology, P.R. China, Electrochromic properties of Al doped B-substituted NiO films prepared by Sol-gel
  • Przemyslaw Malanowski, Eindhoven University of Technology,   The Netherlands, Molecular mechanism of photolysis and photo-oxidation of poly(neopentyl isophthalate)
  • Antonio Mercado-Cabrera, ININ Plasma Physics Laboratory,  Mexico D.F, Ion implantation of oxygen and nitrogen in CpTi
  • Rino Morent, Research Unit Plasma Technology (RUPT) – Department of Applied Physics – Faculty of Engineering – Ghent University, Belgium, Deposition of HMDSO-based coatings using an atmospheric pressure dielectric barrier discharge
  • Sang-Won Myoung, Changwon National University, School of Nano & Advanced Materials Engineering, Korea, Fabrication and Characterization of Eco-friendly functional wallpaper using nonmetallic minerals
  • Jiamiao Ni, Wuhan University of Technology, P.R. China, Production of high quality transparent and infrared reflection SiO2/Al:ZnO/SiO2 multilayered films using radio frequency magnetron sputtering
  • Tanzeela N. Raja, Van ‘t Hoff Institute for Molecular Sciences, Faculty of Science, University of Amsterdam, Amsterdam, The Netherlands, Fluorescence  study of hydrophobic and hydrophilic acrylate polymer latex
  • Corne Rentrop, TNO Science & Industry, Eindhoven, The Netherlands, Effect of nano-filler modification on coating performance
  • Ewa Rudnik, AGH University of Science and Technology, Cracow, Poland, Electroless depostion of Ni-P and Co-P composites with ceramic particles
  • Guadalupe  Olayo, Physics Department, National Institute for Nuclear Research,  Mexico, Affinity of amined plasma polymers with ionic solutions similar to the human body
  • Willem-Pier Vellinga, M2i Materials Innovation Institute & University of Groningen, Applied Physics, The Netherlands, 3-D effects in delamination of residually stressed rough polymer-metal interfaces
  • Te-Hui Wu, Eindhoven University of Technology,  The Netherlands, Mobility of water and charge carriers in polymer/ oxide/ aluminum alloy interfaces
  • Goro Yamauchi, Daido Institute of Technology, Japan, N-doped TiO2 added water repellent and contamination free material
  • Ming Yuan, Eindhoven University of Technology,  The Netherlands, Conductivity of fluorinated Phthalcon/epoxy coatings