COSI Proceedings

The Proceedings of Coatings Science International Conferences 2005 - 2013 have been published as a special issue of Progress in Organic Coatings.

COSI 2013 / POC in press (2014)

  1. G. de With, R.A.T.M. van Benthem, Editorial POC COSI 2013 , POC 77 [10](2014) 1513-1515.
  2. Ge Cheng, Barnaby W. Greenland, Chris Lampard, Neal Williams, Malkit S. Bahra, Wayne Hayes, Hyperbranched polymers containing oxazoline monomers and succinic anhydride: applications in fast drying, low solvent coating formulations, POC 77 [10](2014) 1516-1522.
  3. J.S. Nunes, S.J. Bohórquez, M. Meeuwisse, D. Mestach, J.M. Asua, Efficient strategy for hard nano-sphere usage: boosting the performance of waterborne coatings, POC 77 [10](2014) 1523-1530.
  4. J.A. Olivares, J.M. Galván-Miyoshi, F.L.S. Cuppo, F. Zaldo, A. García-Valenzuela, Drying dynamics of polymers films by an interferometric technique, POC 77 [10](2014) 1531-1538.
  5. Günter Wuzella, Andreas Kandelbauer, Arunjunai Raj Mahendran, Uwe Müller, Alfred Teischinger, Influence of thermo-analytical and rheological properties of an epoxy powder coating resin on the quality of coatings on medium density fibreboards (MDF) using in-mould technology,POC 77 [10](2014) 1539-1546.
  6. Monica Badila, Christoph Jocham, Wenbiao Zhang, Thomas Schmidt, Günter Wuzella, Uwe Müller, Andreas Kandelbauer, Powder coating of veneered particle board surfaces by hot pressing, POC 77 [10](2014) 1547-1553.
  7. Ö. Pekcan, S. Ugur, M.S. Sunay, Fluorescence study of film formation from PS/Al2O3 nanocomposites, POC 77 [10] (2014) 1554-1561.
  8. M. van Soestbergen, V. Baukh, S.J.F. Erich, H.P. Huinink, O.C.G. Adan, Release of low-soluble cerium corrosion inhibitors from organic coatings, POC 77 [10](2014) 1562-1568.
  9. P. Roose, M. Berlier, P. De Doncker, J.-N. Baurant, P. Walters, UV-Nanoparticles: Photopolymerized Polymer Colloids From Aqueous Dispersions of Acrylated Oligomers, POC 77 [10](2014) 1569-1576.
  10. Kristian Petersen Nørgaard, Kim Dam-Johansen, Pere Català, Søren Kiil, Laboratory and gas-fired furnace performance tests of epoxy primers for intumescent coatings,POC 77 [10](2014) 1577-1584.
  11. Boonchoat Paosawatyanyong, Piyarat Jermsutjarit, Worawan Bhanthumnavin, Graft copolymerization coating of methacryloyloxyethyl diphenyl phosphate flame retardant onto silk surface, POC 77 [10](2014) 1585-1590.
  12. Stefan Holberg, Claus Bischoff, Application of a repellent urea-siloxane hybrid coating in the oil industry, POC 77 [10](2014) 1591-1595.

COSI 2012 / POC 76 [12] (2013)

  1. G. de With, R.A.T.M. van Benthem, Editorial POC COSI 2012, POC 76 [12] (2013) 1701-1703.
  2. C.E. Koning. R.J. Sablon, E. Hosseini Nejad, R. Duchateau, P. Buijsen, Novel coating resins based on polycarbonates and poly(ester-co-carbonate)s made by catalytic chain growth polymerziation of epoxides with CO2 and with anhydrice/CO2, POC 76 [12] (2013) 1704-1711.
  3. Linda C. Bailosky, Lynn M. Bender, Daniel Bode, Riaz A. Choudhery, Gary P. Craun, Kenneth J. Gardner, Candice R. Michalski, Jude T. Rademacher, Guy J. Stella, David J. Telford, Synthesis of polyether polyos with epoxidized soy bean oi , POC 76 [12] (2013) 1712-1719.
  4. I.D. Gunbas, M.E.L. Wouters, R.A.T.M. van Benthem, C.E. Koning, B.A.J. Noordover, PDMS-modified poly(styrene-alt-maleic anhydride)s as water-borne coatings based on surfactant-free latexes, POC 76 [12] (2013) 1720-1725.
  5. Vanesa García-Pacios, Manuel Colera, Yoshiro Iwata, José Miguel Martín-Martínez, Incidence of the polyol nature in waterborne polyurethane dispersions on their performance as coatings on stainless steel, POC 76 [12] (2013) 1726-1729 .
  6. Søren Kiil, Mathematical modelling of photoinitiated coating degradation: Effects of coating glass transition temperature and light stabilizers, POC 76 [12] (2013) 1730-1737.
  7. Isara Jirasutsakul, Boonchoat Paosawatyanyong, Worawan Bhanthumnavin, Aromatic phosphorodiamidate curing agent for epoxy resin coating with flame-retarding properties, POC 76 [12] (2013) 1738-1746.
  8. Eriko Sato, Sayoko Nagai, Akikazu Matsumoto, Reversible thickness control of polymer thin films containing photoreactive coumarin derivative units, POC 76 [12] (2013) 1747-1751.
  9. M. Mihelcic, I. Jerman, B. Orel, Preparation of electrochromic NI1-xO and TIO2 coatings from pigment dispersions and their application in electrochromic foil based devices, POC 76 [12] (2013) 1752-1755.
  10. K. Murugan, R. Subasri, T.N. Rao, Ashutosh S. Gandhi, B.S. Murty, Synthesis, characterization and demonstration of self-cleaning TiO2 coatings on glass and glazed ceramic tiles, POC 76 [12] (2013) 1756-1760.
  11. Shujuan Tan, Shujuan Yu, Guoyue Xu, Yachen Zhang, Preparation and properties studies of paraffin/high density polyethylene composites and phase-change coatings, POC 76 [12] (2013) 1761-1764.
  12. M.R. Tchoquessi Doidjo, L. Belec, E. Aragon, Y. Joliff, L. Lanarde, M. Meyer, M. Bonnaudet, F.X. Perrin, Influence of silane-based treatment on adherence and wet durability of fusion bonded epoxy/steel joints, POC 76 [12] (2013) 1765-1772.
  13. Y.T. Pei, X.L. Bui, J.P. van der Pal, D. Martinez-Martinez, J.Th.M. De Hosson, Flexible diamond-like carbon film coated on rubber, POC 76 [12] (2013) 1773-1778.
  14. A.B. Chaudhari, Abhijeet Anand, S.D. Rajput, R.D. Kulkarni, V.V. Gite, Synthesis, characterization and application of azadirachta indica juss (neem oil) fatty amides (AIJFA) based polyurethanes coatings: A renewable novel approach, POC 76 [12] (2013) 1779-1785.
  15. A. Georgiadis, F.N. Muhamad, A. Utgenannt, J.L. Keddie, Aesthetically-textured, hard latex coatings by fast IR evaporative lithography processing, POC 76 [12] (2013) 1786-1791.
  16. Jiajie Hua, Ziwei Liu, Yongzhe Wang, Yi Zeng, Xuebin Zheng, Hu Wang, In-situ microstructure characterization of ZrO2 coating at high temperature, POC 76 [12] (2013) 1792-1797.
  17. Ida Poljanšek, Ema Fabjan, Klemen Burja, Dolores Kukanja, Emulsion copolymerization of vinyl actetat - ethylene in high pressure reactor - characterization by inline FTIR spectroscopy, POC 76 [12] (2013) 1798-1804.
  18. Ô. Yargi, Š. Ugur, Ô. Pekcan, Fluorescence quenching method for monitoring oxygen diffusion into PS/CNT composite films, POC 76 [12] (2013) 1805-1809.
  19. Abou-Elhagag A. Hermas, Mohamed Abdel Salam, Salih S. Al-Juaid, In situ electrochemical preparation OF multi-walled carbon nanotubes/polyaniline composite on the stainless steel, POC 76 [12] (2013) 1810-1813.
  20. Bin Liu, Zhi-gang Fang, Hong-bin Wang, Tao Wang, Effect of cross linking degree and adhesion force on the anti-corrosion performance o fepoxy coatings under simulated deep sea environment, POC 76 [12] (2013) 1814-1818.
  21. D. Álvarez, A. Collazo, C. Pérez, The use of sol-gel film as pretreatment for tinplate used in canning industry, POC 76 [12] (2013) 1819-1826.
  22. Yeong-Mu Ko, Han-Cheol Choe, Sang-Chul Jung, Byung-Hoon Kim, Plasma depostion of a silicone-like layer for the corrosion protection of magnesium, POC 76 [12] (2013) 1827-1832.
  23. J. Simancas, D. de la Fuente, B. Chico, L. Madueño, F. Camón, M.C. Blanco, M. Morcillo, Anticorrosive behaviour of Cr(VI)-free surface pretreatments applied on magnesium alloys, POC 76 [12] (2013) 1833-1840.
  24. J.H. Kong, M. Okumiya, Y. Tsunekawa, S.G. Kim, M. Yoshida, AlN and intermetallic compound layers formed between aluminium and austenitic stainless steel using barrel nitriding, POC 76 [12] (2013) 1841-1845.
  25. Claudiu Constantin Manole, Olivier Marsan, Cedric Charvillat, Ioana Demetrescu, Francis Maury, Evidences for liquid encapsulation in PMMA ultra-thin film grown by liquid injection Photo-CVD, POC 76 [12] (2013) 1845-1850.
  26. Kristian Petersen Nørgaard, Kim Dam-Johansen, Pere Català, Søren Kiil, Investigation of char strength and expansion properties of an intumescent coating exposed to rapid heating rates, POC 76 [12] (2013) 1851-1857.
  27. A. Mercado-Cabrera, B. Jaramillo-Sierra, R. López-Callejas, R. Valencia-Alvarado, A. de la Piedad-Beneitez, R. Peña-Eguiluz, S. Barocio-Delgado, A. Muñoz-Castro, B. Rodríguez-Méndez, Surface modification of polypropylene fiber for hydrophilicity enhancement aided by DBD plasma, POC 76 [12] (2013) 1858-1862.
  28. D. Bellisario, F. Quadrini, L. Santo , Nano-clay filled polyester coatings, POC 76 [12] (2013) 1863-1868.
  29. Bo-Ra Kim, Hyo-Jin Oh, Kang-Seop Yun, Sang-Chul Jung, Wooseung Kang, Sun-Jae Kim, Effect of TiO2 supporting layer on Fe2O3 photoanode for efficient water splitting, POC 76 [12] (2013) 1869-1873.
  30. Hale Berber Yamak, Hüseyin Yildirim, Improvement of film properties of vinyl acetate based emulsion polymers by using different types of maleic acid diesters, POC 76 [12] (2013) 1874-1878.

COSI 2011 / POC 74 [4] (2012)

  1. G. de With, R.A.T.M. van Benthem , Editorial POC COSI 2011 , POC 74 [4] (2012) 633-634.
  2. K.A. Gesheva, T.M. Ivanova, G. Bodurov , Transition metal oxide films: Technology and "smart windows" electrochromic device performance , POC 74 [4] (2012) 635-639.
  3. J. Eversdijk, S.J.F. Erich, S.P.M. Hermanns, O.C.G. Adan, M. De Bolle, K. de Meyer, D. Bylemans, M. Bekker, A.T. ten Cate , Development and evaluation of a biocide release system for prolonged antifugal activity in finishing materials , POC 74 [4] (2012) 640-644
  4. C.Y.W. Lin, A. Nakaruk, C.C. Sorrell , Mn-doped titania thin films prepared by spin coating , POC 74 [4] (2012) 645-647.
  5. G. Ciobanu, S. Ilisei, C. Luca, G. Carja, O. Ciobanu , The effect of vitamins to hydroxyapatite growth on porous polyurethane substrate , POC 74 [4] (2012) 648-653.
  6. J. Godnjavec, B. Znoj, N. Veronovski, P. Venturini , Polyhedral oligomeric silsesquioxanes as titanium dioxide surface modifiers for transparent acrylic UV blocking hybrid coating , POC 74 [4] (2012) 654-659.
  7. K, Sermsantiwanit, S. Phattanarudee , Preparation of bio-based nanocomposite emulsions: effect of clay type , POC 74 [4] (2012) 660-666.
  8. H. Yasuda, L. Ledernez, F. Olcaytug, G. Dame, M. Bergman , Biocompatible nanofilm coating by magneto-luminous polymerization of methane , POC 74 [4] (2012) 667-678.
  9. R.J. Verley, E.K. Simmonds, J.E. Seebergh, D.H. Berry , Investigation of factors impacting the in-service degradation of aerospace coatings , POC 74 [4] (2012) 679-686
  10. V. Samaryk, A. Voronov, I. Tarnavchyk, S. Varvarenko, N. Nosova, O. Budishevska, A. Kohut, S. Voronov , Formation of coatings with tailored properties on polyperoxide-modified polymeric purfaces , POC 74 [4] (2012) 687-696.
  11. A.R. Mahendran, G. Wuzella, N. Aust, A. Kandelbauer, U. Müller , Photocrosslinkable modified vegetable oil based resin for wood surface coating application , POC 74 [4] (2012) 697-704.
  12. C. Philipp, S. Eschig , Waterborne polyurethane wood coatings based on rapeseed fatty acid methyl esters , POC 74 [4] (2012)705-711.
  13. M. Barletta, S. Vesco, F. Trovalusci , Effect of the substrate and interface on micro-scratch deformation of epoxy-polyester powder coatings , POC 74 [4] (2012) 712-718.
  14. H. Oehler, I. Alig, D. Lellinger, M. Bargmann , Failure modes in organic coatings studied by scanning acoustic microscopy , POC 74 [4] (2012) 719-725.
  15. A.E. Hughes, S. Mayo, Y.S. Yang, T. Markley, S.V. Smith, S. Sellaiyan, A. Uedono, S.G. Hardin, T.H. Muster , Using X-ray tomography, PALS and Raman Spectroscopy to characterisation inhibitors in epoxy coatings , POC 74 [4] (2012) 726-733.
  16. C. Regula, T. Kukasczyk, J. Ihde, T. Fladung, R. Wilken , Corrosion protection of metal surfaces by atmospheric pressure plasma jet treatment , POC 74 [4] (2012) 734-738.
  17. Y.S. Bae, D.G. Ra, S.J. Kim, B.H. Kim, S.G. Seo, J.S. Kim, S.C. Jung , Effects of microwave, UV, and O3 on the propylene gas degradation by photocatalytic reaction with CVD TiO2 films , POC 74 [4] (2012) 739-744.
  18. Hyo-Jin Oh, Kyung-Jong Noh, Hye-Kyung Ku, Sang-Chul Jung, Won-Jae Lee, Wooseung Kang, Sun-Jae Kim , Preparation of various metal ions doped hydrogen titanate nano particle coated thin films by layer-by-layer self-assembling method for an electrochromic electrode , POC 74 [4] (2012) 745-749.
  19. J.R. Laguna-Camacho, L.A. Cruz-Mendoza, J.C. Anzelmetti-Zaragoza, A. Marquina-Chávez, M. Vite-Torres, J. Martínez-Trinidad , Solid particle erosion on coatings employed to protect die casting molds , POC 74 [4] (2012) 750-757.
  20. H. Lee, S.H. Park, S.J. Kim, B.H. Kim, H.S. Yoon, J.S. Kim, S.C. Jung , The effect of combined processes for advanced oxidation of organic dye using CVD TiO2 film photo-catalysts , POC 74 [4] (2012) 758-763.
  21. Abhijeet Anand, R.D. Kulkarni, V.V. Gite , Preparation and properties of eco-friendly two pack PU coatings based on renewable source (Sorbitol) and its property improvement by nano ZnO , POC 74 [4] (2012) 764-767.
  22. E. Arslan, Y. Totik, I. Efeoglu , The Investigation of the tribocorrosion properties of DLC coatings deposited on Ti6Al4V Alloys by CFUBMS , POC 74 [4] (2012) 768-771.
  23. E. Arslan, Y. Totik, I. Efeoglu , Comparison of structure and tribological properties of MoS2-Ti films deposited by biased-dc and pulsed-dc , POC 74 [4] (2012) 772-776.
  24. J. Wang, J. Feng, X. Zou, Y. Long, X. Tian , Effect of surface microstructure on hydrophobicity of cCoating , POC 74 [4] (2012) 777-780.
  25. C. Esposito Corcione, M. Frigione , UV- cured polymer- boehmite nanocomposite as protective coating for wood elements , POC 74 [4] (2012) 781-787.
  26. J. Sudagar, J.S. Lian, Q. Jiang, Z.H. Jiang, G.Y. Li, R. Elansezhian , The performance of surfactant on the surface characteristics of electroless nickel coating on magnesium alloy , POC 74 [4] (2012) 788-793.
  27. W. Navarrini, M. Vittoria Diamanti, M. Sansotera, F. Persico, W. Menghua, L. Magagnin, S. Radice , UV-resistant amporphous fluorinated coating for anodized titatnium surfaces , POC 74 [4] (2012) 794-800.

COSI 2010 / POC 70 [4](2011)

  1. G.de With, R.A.T.M. van Benthem, Editorial POC COSI 2010, POC 70 [4] (2011) 157-159.
  2. X. Liu, E. Elmahdy, R.D. Wildman, I.A. Ashcroft, P.D. Ruiz, Experimental investigation and material modelling of fresh and UV aged Japanese lacquer (Urushi) , POC 70 [4] (2011) 160-169.
  3. S. Saha, D. Kocaefe, C. Krause, T. Larouche, Effect of Titania and Zinc oxide particles on acrylic polyurethane coating performance, POC 70 [4] (2011) 170-177.
  4. Y. Butista, J. Gonzalez, J. Gilabert, M.J. Ibañez, V. Sanz, Correlation between the wear resistance and the scratch resistance for nanocomposite coatings, POC 70 [4] (2011) 178-185.
  5. G. Wuzella, A. Kandelbauer, A.R. Mahendran, A. Teisschinger, Thermochemical and isoconversional kinetic analysis of a polyester-epoxy hybrid powder coating resin for wood based panel finishing, POC 70 [4] (2011) 186-191.
  6. S. Kiil, Mathematical modelling of simultaneous solvent evaporation and chemical curing in thermoset coatings: a parameter study, POC 70 [4] (2011) 192-198.
  7. J. Manara, M. Reidinger, M. Rydzek, M. Arduini-Schuster, Polymer-based pigmented coatings on flexible substrates with spectrally selective characteristics to improve the thermal properties, POC 70 [4] (2011) 199-204.
  8. K. Dullaert, P. Steeman, J. Bolks, A mechanistic study of the effect of pigment loading on the appearance of powder coatings: The effect of surface topography on the optical properties of powder coatings: Modelling and experimental results, POC 70 [4] (2011) 205-212.
  9. J.M. Vega, N. Granizo, D. de la Fuente, J. Simancas, M. Morcillo, Corrosion inhibition of aluminium by coatings formulated with Al-Zn-vanadate hydrotalcite, POC 70 [4] (2011) 213-219.
  10. M. Cécius, C. Jérôme, A fully aqueous sustainalbe process for strongly adhering antimicrobial coatings on stainless steel, POC 70 [4] (2011) 220-223.
  11. V. Stenzel, Y. Wilke, W. Hage, Drag-reducing paints for the reduction of fuel consumption in aviation and shipping, POC 70 [4] (2011) 224-229.
  12. F. Simon, S. Kunkel, H. Oehler, D. Lellinger, P. Spahn, I. Alig, Investigation of deformation mechanisms during latex film formation by combination of unilateral NMR and near infrared spectroscopy, POC 70 [4] (2011) 230-239.
  13. H. Hintze-Bruening, A-L. Troutier, F. Leroux, Layered particle based polymer composites for coatings. Part III - Textured coatings obtained via lyotropic liquid crystals, POC 70 [4] (2011) 240-244.
  14. G. Guerriero, R. Alderliesten, T. Dingemans, R. Benedictus, Thermotropic liquid crystalline polymers as protective coatings for aerospace, POC 70 [4] (2011) 245-251.
  15. G.-L. Song, A dipping E-coating for Mg alloys, POC 70 [4] (2011) 252-258.
  16. M. Barletta, D. Bellisario, Manufacture and characterization of free-standing epoxy-polyester films, POC 70 [4] (2011) 259-272.
  17. M. Barletta, D. Bellisario, Effects of IR pre-curing conditions on wear resistance of metal-flakes powder coatings, POC 70 [4] (2011) 273-286.
  18. B. Díaz-Benito, F. Velasco, M. Pantoja, Mechanical properties of polyester films painted after silanization of 6063 aluminium alloy with different pretreatment conditions, POC 70 [4] (2011) 287-292.
  19. N. de Geyter, R. Morent, S. van Vlierberghe, M. Frère-Trentesaux, P. Dubruel, E. Payen, Effect of electrode geometry on the uniformity of plasma-polymerized methyl methacrylate coatings, POC 70 [4] (2011) 293-299.
  20. S. Shahidi, M. Ghoranneviss, Investigation on dye ability and antibacterial activity of nano-layer platinum coated polyester fabric using DC magnetron sputtering, POC 70 [4] (2011) 300-303.
  21. E.H. Kim, J.H. Lee, Y.G. Jung, Dual Coating process for a high functional reinforcement phase for metal matrix composite, POC 70 [4] (2011)304-309.
  22. E.H. Kim, J.H. Lee, Y.G. Jung, C. Lee, M. Lee, J. Park, Preparation of Ni-coated TiC particles using potential hydrogen (pH) for dispersion into a molten metal, POC 70 [4] (2011) 310-317.
  23. A.K. Krella, Cavitation erosion resistance parameter of hard CAVD coatings, POC 70 [4] (2011) 318-325.
  24. A.P. Mousinho, R.D. Mansano, Micropatterning of single-walled carbon nanotubes forest, POC 70 [4] (2011) 326-329.
  25. D.A. Molloy, S. Malinov, T. McNally, P. Hill, Thermal study of selectively plated nickel sulfamate coatings, POC 70 [4] (2011) 330-335.
  26. R. Morent, N. de Geyter, S. van Vlierberghe, A. Beaurain, P. Dubruel, E. Payen, Influence of operating parameters on plasma polymerization of acrylic acid in mesh-to-plate dielectric barrier discharge, POC 70 [4] (2011) 336-341.
  27. T. Nesterova, K. Dam-Johansen, S. Kiil, Synthesis of durable microcapsules for self-healing anticorrosive coatings: a comparison of selected methods, POC 70 [4] (2011) 342-352.
  28. N. Ohtsu, M. Hayashi, J. Ueta, T. Kanno, Biofunctional calcium titanate coating on titanium by simple chemical treatment process using calcium-hydroxide slurry: Effects of the heating temperature, POC 70 [4] (2011) 353-357.
  29. Y. Bautista, M.P. Gómez, C. Ribes, V. Sanz, Relation between the scratch resistance and the chemical structure of organic-inorganic hybrid coatings, POC 70 [4] (2011) 358-364.
  30. V.Z. Rizzo, R.D. Mansano, Electro-optically sensitive Diamond-Like Carbon thin films deposited by reactive magnetron sputtering for electronic device applications, POC 70 [4] (2011) 365-368.
  31. M. Rydzek, M. Reidinger, M. Arduini-Schuster, J. Manara, Comparative study of sol-gel derived tin-doped indium- and aluminum doped zinc-oxide coatings for electrical conducting and low-emitting surfaces, POC 70 [4] (2011) 369-375.
  32. S. Saha, D. Kocaefe, Y. Boluk, A. Pichette, Enhancing exterior durability of jack pine by photo-stabilization of acrylic polyurethane coating using bark extract: part 1- effect of UV on color change and ATR-FTIR, POC 70 [4] (2011) 376-382.
  33. M. Samadzadeh, S. Hatami Boura, M. Peikari, M. Kasiriha, A. Ashrafi, Tung oil: an autonomous repairing agent for self-healing epoxy coatings, POC 70 [4] (2011) 383-387.
  34. M. Ghorannevis, S. Shahidi, A. Anvari, Z. Motaghi, J. Wiener, I. Slamborova, Influence of plasma sputtering treatment on natural dyeing and antibacterial activityof wool fabrics, POC 70 [4] (2011) 388-393.
  35. N. Granizo, J.M. Vega, I. Díaz, B. Chico, D. de la Fuente, M. Morcillo, Paint systems formulated with ion-exchange pigments applied on carbon steel. Effect of surface preparation, POC 70 [4] (2011) 394-400.

COSI 2009 / POC 68 [1-2](2010)*

  1. G. de With and R.A.T.M. van Benthem, Editorial POC COSI 2009, POC 68 [1-2] (2010) 1-2.
  2. M. Wouters, C. Rentrop, P. Willemsen, Surface Structuring and Coating Performance Novel biocidefree nanocomposite coatings with anti-fouling and fouling release properties , POC 68 [1-2] (2010) 4-11.
  3. A.C.C. Esteves, J. Brokken-Zijp, J. Laven, G. de With, Light converter coatings from cross-linked PDMS/particles composite materials , POC 68 [1-2] (2010) 12-18.
  4. Z-L. Wu, C-W. Wu, G-N. Chen, and K. Zhang, On a novel method of impact by front-end-coated bullet to evaluate the interface adhesion of the film and substrate , POC 68 [1-2] (2010) 19-22.
  5. W. Becker, M. Nagel, Rheological measurements as tool to study curing of water borne clear coats , POC 68 [1-2] (2010) 23-27.
  6. A. L. Yahkind, D.A. Paquet Jr., D. V. Parekh, C. L. Stine, and L. G. J. van der Ven, Polyols based on isocyanates and melamines and their applications in 1K and 2K coatings , POC 68 [1-2] (2010) 28-36. Orininal publication POC 67 [2] (2010) 137-145.
  7. A. Carroy, T. Hintermann, G. Baudin, D. Bauer, P. Contich, K. Dietliker, M. Faller, R. Kohli Steck, C. Lordelot, K. Misteli, Novel Latent Catalyst for 2K-PUR systems , POC 68 [1-2] (2010) 37-41.
  8. A. Mihashi, H. Tamura, E. Sato, and A. Matsumoto, Synthesis of degradable network polymers containing peroxy units in the main chain or the crosslinking point , POC 68 [1-2] (2010) 42-47. Original publication POC 67 [2] (2010) 85-91.
  9. G. Bierwagen, R. Brown, D. Battocchi and S. Hayes, Active Metal-Based Corrosion Protective Coating Systems for Aircraft Requiring No Chromate Pretreatment , POC 68 [1-2] (2010) 48-61. Original publication POC 67 [2] (2010) 195-208.
  10. D.D.N. Singh and D. Bhattacharya, Performance and mechanism of action of self priming organic coating on oxide covered steel surface , POC 68 [1-2] (2010) 62-69. Original publication POC 67 [2] (2010) 129-136.
  11. P. A. Sørensen, K. Dam-Johansen, C. E. Weinell, S. Kiil, Cathodic delamination: quantification of ionic transport rates along coating-steel interfaces , POC 68 [1-2] (2010) 70-78. Original publication POC 67 [2] (2010) 107-115.
  12. X. Shi, S.G. Croll, Recovery of surface defects on epoxy coatings and implications for the use of accelerated weathering , POC 68 [1-2] (2010) 79-87. Original publication POC 67 [2] (2010) 120-128.
  13. N. Alcón, A. Tolosa, M.T. Rodríguez, C. Moreno, Development of photoluminescent powder coatings bu UV curing process , POC 68 [1-2] (2010) 88-90. Original publication POC 67 [2] (2010) 92-94.
  14. D. Álvarez, A. Collazo, M. Hernández* , X. R. Nóvoa, C. Pérez, Characterization of hybrid sol-gel coatings doped with hydrotalcite-like compounds to improve corrosion resistance of AA2024-T3 alloys , POC 68 [1-2] (2010) 91-99. Original publication POC 67 [2] (2010) 152-160.
  15. M. Barletta, D. Bellisario, G. Rubino, N. Ucciardello, Scratch and wear resistance of transparent topcoats on carbon laminates , POC 68 [1-2] (2010) 100-110. Original publication POC 67 [2] (2010) 209-219.
  16. D. Bellisario, M. Barletta, N.Ucciardello, Scratch resistance of fast cured metal flake powder coatings , POC 68 [1-2] (2010) 111-119. Original publication POC 67 [2] (2010) 161-169.
  17. L. Barchi, U. Bardi, S. Caporali, M. Fantini, A. Scrivani, A. Scrivani, Electroplated bright aluminium coatings for anticorrosion and decorative purposes , POC 68 [1-2] (2010) 120-125. Original publication POC 67 [2] (2010) 146-151.
  18. C. Eckert, C. Pflitsch, B. Atakan, Sol-Gel deposition of multiply doped thermographic phosphor coatings Al2O3:(M3+1,M3+2)(M1,2=Dy, Cr, Tm) for wide range surface temperature measurement application , POC 68 [1-2] (2010) 126-129. Original publication POC 67 [2] (2010) 116-119.
  19. E-H. Kim, W-R. Lee, S-W. Myoung, J-P. Kim, Y.G. Jung, Y-S. Nam, W-S. Kyoung, H. Cho, Characterization of waterborne polyurethane for ecofriendly functional floor plate , POC 68 [1-2] (2010) 130-134. Original publication POC 67 [2] (2010) 102-106.
  20. J-Y. Kwon, S-I. Jung, S-Y. Lee, P-H. Lee, J-H. Lee, Y-G. Jung, U. Paik, H. Cho, J-C. Chang, Interfacial stability and contact damage resistance by incorporating buffer layer in thermal barrier coatings , POC 68 [1-2] (2010) 135-141. Original publication POC 67 [2] (2010) 95-101.
  21. R. López-Callejas, H. Millán-Flores, A. E. Muñoz-Castro; R. Valencia-Alvarado, A. Mercado-Cabrera, R. Peña Eguiluz, S. R. Barocio and A. de la Piedad Beneitez, Nitriding of 6061T6 aluminium by plasma immersion ion implantation at low energy , POC 68 [1-2] (2010) 142-145. Original publication POC 67 [3] (2010) 361-364.
  22. A. Nebatti, C. Pflitsch, C. Eckert, B. Atakan, Sol-Gel-Deposition of thin TiO2: Eu3+ thermographic phosphor films , POC 68 [1-2] (2010) 146-150. Original publication POC 67 [3] (2010) 356-360.
  23. S.M. Trey, C. Nilsson, E. Malmström, M. Johansson, Thiol-ene Networks and Reactive Surfaces via Photoinduced Polymerization of Allyl-ether Functional Hyperbranched Polymers , POC 68 [1-2] (2010) 151-158. Original publication POC 67 [3] (2010) 348-355.

*The Publisher regrets that articles from this COSI 2009 special issue were previously published in Progress in Organic Coatings, 67 [2] and [3] for citation purposes please use the original publication.

COSI 2008 / POC 64 [2-3](2009)

  1. G. de With and R.A.T.M. van Benthem, Editorial POC CoSi 2008 , POC 64 [2-3] (2009) 109-111.
  2. I. Alig, S. Tadjbach, P. Krüger, H. Oehler and D. Lellinger, Characterization of coating systems by scanning acoustic microscopy: Debonding, blistering and surface topology, POC 64 [2-3] (2009) 112-119.
  3. B. Liu, L. Wen and X. Zhao, Efficient degradation of aqueous methyl orange over TiO2 and CdS electrodes using photoelectrocatalysis under UV and visible light irradiation, POC 64 [2-3] (2009) 120-123.
  4. T. Iwamura, K. Adachi, M. Sakaguchi and Y. Chujo, Synthesis of organic—inorganic polymer hybrids from poly(vinyl chloride) and polyhedral oligomeric silsesquioxane via CH/π interaction, POC 64 [2-3] (2009)124-127.
  5. D.K. Chattopadhyay, A.D. Zakula and D.C. Webster, Organic—inorganic hybrid coatings prepared from glycidyl carbamate resin, 3-aminopropyl trimethoxy silane and tetraethoxyorthosilicate, POC 64 [2-3] (2009)128-137.
  6. A. Foyet, T.H. Wu, L. van der Ven, A. Kodentsov, G. de With and R. van Benthem, Influence of mixing ratio on the permeability of water and the corrosion performance of epoxy/amine coated un-pretreated Al-2024 evaluated by impedance spectroscopy, POC 64 [2-3] (2009) 138-141.
  7. P.A. Sørensen, S. Kiil, K. Dam-Johansen and C.E. Weinell, Influence of substrate topography on cathodic delamination of anticorrosive coatings, POC 64 [2-3] (2009) 142-149.
  8. A.. Weber, W. Bremser and K. Hiltrop, Creating new materials with melamine resins, POC 64 [2-3] (2009) 150-155.
  9. M. Wouters, E. Craenmehr, K. Tempelaars, H. Fischer, N. Stroeks and J. van Zanten, Preparation and properties of a novel remendable coating concept , POC 64 [2-3] (2009)156-162.
  10. P. Roose, I. Fallais, C. Vandermiers, M.-G. Olivier and M. Poelman, Radiation curing technology: An attractive technology for metal coating , POC 64 [2-3] (2009) 163-170.
  11. R. Knischka, U. Lehmann, U. Stadler, M. Mamak and J. Benkhoff, Novel approaches in NIR curing technology, POC 64 [2-3] (2009) 171-174.
  12. M. Shirai and H. Okamura, i-Line sensitive photoacid generators for UV curing, POC 64 [2-3] (2009) 175-181.
  13. A.-L. Troutier-Thuilliez, C. Taviot-Guého, J. Cellier, H. Hintze-Bruening and F. Leroux, Layered particle-based polymer composites for coatings: Part I. Evaluation of layered double hydroxides, POC 64 [2-3] (2009)182-192.
  14. H. Hintze-Bruening, A.-L. Troutier-Thuilliez and F. Leroux, Layered particle-based polymer composites for coatings: Part II–Stone chip resistant automotive coatings, POC 64 [2-3] (2009)193-204.
  15. E.H. Kim, S.W. Myoung, Y.G. Jung and U. Paik, Polyhedral oligomeric silsesquioxane-reinforced polyurethane acrylate, POC 64 [2-3] (2009) 205-209.
  16. A. Fedorov, W.-P. Vellinga and J. De Hosson, Gas permeation and temperature effects in laser-induced delamination, POC 64 [2-3] (2009) 210-215.
  17. N. Baklanova, L. Zhilitskaya and A. Titov, Organometallic polymer-derived interfacial coatings on carbon and SiC fibers, POC 64 [2-3] (2009)216-220.
  18. A.T. ten Cate, S.A.F. Reinders, D.H. Turkenburg, A. Bruin, F. D´Souza, G.T. Donnelly, P.R. Willemsen, J.H. Maas and K.J.C. van Bommel, High density hydrophilic and hydrophobic brush coatings using a polymeric primer layer, POC 64 [2-3] (2009) 221-224.
  19. G.J. Cruz, M.G. Olayo, E. Colin, J.C. Palacios, R. López, E. Granda, A. Muñoz and R. Valencia Metallic layers added by plasma on polyethylene, POC 64 [2-3] (2009) 225-229.
  20. N. De Geyter, R. Morent, S. Van Vlierberghe, P. Dubruel, C. Leys, L. Gengembre, E. Schacht and E. Payen , Deposition of polymethyl methacrylate on polypropylene substrates using an atmospheric pressure dielectric barrier discharge, POC 64 [2-3] (2009) 230-237.
  21. S.M. Trey, M. Lundström, D. Ståhlberg and M. Johansson, Effects of thiol additives on urethane acrylate UV primers for SMC applications, POC 64 [2-3] (2009) 238-246.
  22. M. Barletta, A. Gisario, G. Rubino and L. Lusvarghi, Influence of scratch load and speed in scratch tests of bilayer powder coatings, POC 64 [2-3] (2009)247-258.
  23. A.E. Muñoz-Castro, R. López-Callejas, E.E. Granda-Gutiérrez, R. Valencia-Alvarado, S.R. Barocio, R. Peña-Eguiluz, A. Mercado-Cabrera and A. de la Piedad Beneitez, Ion implantation of oxygen and nitrogen in CpTi, POC 64 [2-3] (2009)259-263.
  24. C. Fei, Z. Hai, C. Chen and X. Yangjian, Study on the tribological performance of ceramic coatings on titanium alloy surfaces obtained through microarc oxidation, POC 64 [2-3] (2009)264-267.
  25. J. Feng, J. Han and X. Zhao, Synthesis of CuInS2 quantum dots on TiO2 porous films by solvothermal method for absorption layer of solar cells, POC 64 [2-3] (2009)268-273.
  26. J.-P. Kim, E.-H. Kim, J.-H. Lee, Y.-G. Jung, N.-H. Kim, S.-C. Choi and U. Paik, Damage resistance of SiC and Si3 N4 coatings with control of microstructure and thickness, POC 64 [2-3] (2009) 274-280.
  27. M.T. Kim, D.S. Kim and O.Y. Oh, In situ deposition of oxide layer using fuel additive and its effect on the oxidation of SM 45C blades for micro-gas turbines , POC 64 [2-3] (2009) 281-286.
  28. A. Kirchner and J. Houweling, Measuring flake orientation for metallic coatings, POC 64 [2-3] (2009 )287-293.
  29. K. Lachmann, S. Eckert, A. Vogel, A. Klinger, A. Gebert and C.-P. Klages, Development of a multifunctional coating system for laser-induced material transport, POC 64 [2-3] (2009) 294-299.
  30. X. Lou, X. Zhao, J. Feng and X. Zhou, Electrochromic properties of Al doped B-subsituted NiO films prepared by sol–gel, POC 64 [2-3] (2009) 300-303 .
  31. R. Morent, N. De Geyter, S. Van Vlierberghe, P. Dubruel, C. Leys, L. Gengembre, E. Schacht and E. Payen, Deposition of HMDSO-based coatings on PET substrates using an atmospheric pressure dielectric barrier discharge, POC 64 [2-3] (2009) 304-310.
  32. S.-W. Myoung, S.-I. Jung, E.-H. Kim, Y.-G. Jung, Y.-S. Nam and W.-S. Kyoung, Fabrication and characterization of eco-friendly functional wallpaper using nonmetallic minerals, POC 64 [2-3] (2009) 311-316.
  33. J. Ni, Q. Zhao and X. Zhao, Transparent and high infrared reflection film having sandwich structure of SiO2 /Al:ZnO/SiO2 , POC 64 [2-3] (2009) 317-321.
  34. E. Colín, M.G. Olayo, G.J. Cruz, L. Carapia, J. Morales and R. Olayo, Affinity of amine-functionalized plasma polymers with ionic solutions similar to those in the human body, POC 64 [2-3] (2009) 322-326.

COSI 2007 / POC 61 [2-4](2008)

  1. G. de With and R.A.T.M. van Benthem, Editorial POC CoSi 2007, POC 61 [2-4] (2008) 103-105.
  2. M. Groenewolt, Highly scratch resistant coatings for automotive applications, POC 61 [2-4] (2008) 106-109.
  3. K.J. van den Berg, L.G.J. van der Ven and H.J.W. van den Haak, Development of waterborne UV-A curable clear coat for car refinishes, POC 61 [2-4] (2008) 110-118.
  4. K. Studer, P. Nesvadba, T. Jung, J. Benkhoff, K. Powell and C. Lordelot, Novel curing agents: Thermal radical initiators as viable alternatives to peroxides, POC 61 [2-4] (2008) 119-125.
  5. J. Mallégol, M. Poelman and M.-G. Olivier, Influence of UV weathering on corrosion resistance of prepainted steel, POC 61 [2-4] (2008) 126-135.
  6. S.G. Croll, X. Shi and B.M.D. Fernando, The interplay of physical aging and degradation during weathering for two crosslinked coatings, POC 61 [2-4] (2008) 136-144.
  7. M. Špírková, J. Brus, L. Brozová, A. Strachota, J. Baldrian, M. Urbanovà, J. Kotek, B. Strachotová and M. Šlouf, A view from inside onto the surface of self-assembled nanocomposite coatings, POC 61 [2-4] (2008) 145-155.
  8. J.M. Stubbs and D.C. Sundberg, The dynamics of morphology development in multiphase latex particles, POC 61 [2-4] (2008) 156-165.
  9. I. Alig, D. Lellinger, H. Oehler, S.A. A. damovsky and C. Schick, Microcalorimetry for characterization of film formation and cure of coatings and adhesives, POC 61 [2-4] (2008) 166-175.
  10. R. Bao and S. Jönsson, Using a new approach to analyze a depth profile of double bond conversion in model formulations, POC 61 [2-4] (2008) 176-180.
  11. A. Brun, H. Dihang and L. Brunel, Film formation of coatings studied by diffusing–wave spectroscopy, POC 61 [2-4] (2008) 181-191.
  12. A.P. Kharitonov, Direct fluorination of polymers–From fundamental research to industrial applications, POC 61 [2-4] (2008) 192-204.
  13. M. Hara, S. Yamakawa, M. Saito, S. Tobe and T. Inaba, Bonding adhesive strength for plasma spray with cathode spots of low–pressure arc after grit blasting and removal of oxide layer on metal surface, POC 61 [2-4] (2008) 205-210.
  14. E. Jaehne, S. Oberoi and H.-J.P. Adler, Ultra thin layers as new concepts for corrosion inhibition and adhesion promotion, POC 61 [2-4] (2008) 211-223.
  15. W.J. Soer, W. Ming, C.E. Koning and R.A.T.M. van Benthem, Towards anti-corrosion coatings from surfactant-free latexes based on maleic anhydride containing polymers, POC 61 [2-4] (2008) 224-232.
  16. D. de la Fuente and M. Rohwerder, Fundamental investigation on the stability of the steel/coating interfaces contaminated by submicroscopic salt particles, POC 61 [2-4] (2008) 233-239.
  17. M. Dornbusch, The use of modern electrochemical methods in the development of corrosion protective coatings, POC 61 [2-4] (2008) 240-244
  18. I.-S. Bae, S.-J. Cho, W.S. Choi, H.J. Cho, B. Hong, H.-D. Jeong and J.-H. Boo, Characterization on polymerized thin films for low-k insulator using PECVD, POC 61 [2-4] (2008) 245-248.
  19. M. Barletta, G. Rubino, L. Lusvarghi and F. Pighetti Mantini, Surface appearance and mechanical strength of multi-layer polymeric films, POC 61 [2-4] (2008) 249-261.
  20. M. Barletta, G. Bolelli, A. Gisario and L. Lusvarghi, Mechanical strength and wear resistance of protective coatings applied by fluidized bed (FB), POC 61 [2-4] (2008) 262-282.
  21. B. Chico, J. Simancas, J.M. Vega, N. Granizo, I. Díaz, D. de la Fuente and M. Morcillo, Anticorrosive behaviour of alkyd paints formulated with ion-exchange pigments, POC 61 [2-4] (2008) 283-290.
  22. J.–H. Kang, H.–M. Cha, J.–H. Lee, Y.–G. Jung, H.–S. Lee and V.K. Srivastava, Synthesis and characterization of non–oxide ceramic coatings on graphite substrates by solid–vapor reaction process, POC 61 [2-4] (2008) 291-299.
  23. J.–Y. Kwon, K.–H. Dong, J.–H. Lee, Y.–G. Jung, U. Paik and C.–Y. Jo, Anisotropic mechanical properties and contact damage in air-plasma-sprayed thermal barrier coatings with bond coating nature and thermal exposure condition, POC 61 [2-4] (2008) 300–307.
  24. M. Lonyuk, M. Bosma, C.A.M. Vijverberg, A. Bakker and M. Janssen, Relation between chip resistance and mechanical properties of automotive coatings, POC 61 [2-4] (2008) 308-315.
  25. S.–W. Myoung, S.–H. Park, P.–H. Lee, Y.–G. Jung, D. Joo, K.–H. Lee, H.–S. Lee and U. Paik, Phase transformation and oxidation behavior of Pt–modified MCrAlY coatings, POC 61 [2-4] (2008) 316-320.
  26. Z. Yi, C. Guofeng, W. Ma and W. Wei, Effect of external bias voltage and coating thickness on the photocatalytic activity of thermal sprayed TiO2 coating, POC 61 [2-4] (2008) 321-325.
  27. Z. Ziari, A. Bellel, S. Sahli, Y. Segui and P. Raynaud, A comparative study on the effect of VUV radiation in plasma SiOx-coated polyimide and polypropylene films, POC 61 [2-4] (2008) 326-332.

COSI 2006 / POC 58 [2-3](2007)

  1. G. de With and R.A.T.M. van Benthem, Editorial, POC 58 [2-3] (2007) 77-79.
  2. T. Nabuurs, S. van der Slot and A. Overbeek, Nanomorphology control in aqueous coatings, POC 58 [2-3] (2007) 80-86.
  3. N. Fedullo, E. Sorlier, M. Sclavons, C. Bailly, J.-M. Lefebvre and J. Devaux, Polymer-based nanocomposites: Overview, applications and perspectives, POC 58 [2-3] (2007) 87-95.
  4. M.L. Nobel, S.J. Picken and E. Mendes, Waterborne nanocomposite resins for automotive coating applications, POC 58 [2-3] (2007) 96-104.
  5. A. Pucci, G. Ruggeri, S. Bronco, M. Bertoldo, C. Cappelli and F. Ciardelli, Conferring dichroic properties and optical responsiveness to polyolefins through organic chromophores and metal nanoparticles, POC 58 [2-3] (2007) 105-116.
  6. L.G.J. van der Ven, R.T.M. Leijzer, K.J. van den Berg, P. Ganguli and R. Lagendijk, Interactions between basecoats and clearcoats in car refinish systems, POC 58 [2-3] (2007) 117.
  7. P. Uhlmann, R. Frenzel, B. Voit, U. Mock, B. Szyszka, B. Schmidt, D. Ondratschek, J. Gochermann and K. Roths, Research agenda surface technology: Future demands for research in the field of coatings materials, POC 58 [2-3] (2007) 122-126.
  8. S.V. Lamaka, M.L. Zheludkevich, K.A. Yasakau, R. Serra, S.K. Poznyak and M.G.S. Ferreira, Nanoporous titania interlayer as reservoir of corrosion inhibitors for coatings with self-healing ability, POC 58 [2-3] (2007) 127-135.
  9. A. Seth, W.J. van Ooij, P. Puomi, Z. Yin, A. Ashirgade, S. Bafna and C. Shivane, Novel, one-step, chromate-free coatings containing anticorrosion pigments for metals–An overview and mechanistic study, POC 58 [2-3] (2007) 136-145.
  10. K. Dietliker, R. Hüsler, J.–L. Birbaum, S. Ilg, S. Villeneuve, K. Studer, T. Jung, J. Benkhoff, H. Kura, A. Matsumoto and H. Oka, Advancements in photoinitiators–Opening up new applications for radiation curing, POC 58 [2-3] (2007) 146-157.
  11. M. Shirai, Reworkable UV curing materials, POC 58 [2-3] (2007) 158-165.
  12. J.F. Jacobs, G.J.M. Koper and W.N.J. Ursem, UV protective coatings: A botanical approach, POC 58 [2-3] (2007) 166-171.
  13. D. Maetens, Weathering degradation mechanism in polyester powder coatings, POC 58 [2-3] (2007) 172-179.
  14. A.V. Fedorov, R. van Tijum, W.–P. Vellinga and J.Th.M. De Hosson, Degradation and recovery of adhesion properties of deformed metal–polymer interfaces studied by laser induced delamination, POC 58 [2-3] (2007) 180-186.
  15. M. Fermeglia and S. Pricl, Multiscale modeling for polymer systems of industrial interest, POC 58 [2-3] (2007) 187-199.
  16. I. Alig, H. Oehler, D. Lellinger and S. Tadjbach, Monitoring of film formation, curing and ageing of coatings by an ultrasonic reflection method, POC 58 [2-3] (2007) 200-208.
  17. A.M. Rhoades, D.A. Wicks, B. Miriyala and J. Williamson, Interactions of an antimicrobial peptide (Ac-RRWWRF-NH2) and surfactants: Towards antimicrobial peptide additives for coatings applications, POC 58 [2-3] (2007) 209-216.
  18. J.T. Huybrechts and L.M. Tanghe. 2.1 VOC solvent borne 2K clear coats based on star oligoethers, POC 58 [2-3] (2007) 217-227.
  19. H. Sasaki, Curing properties of cycloaliphatic epoxy derivatives, POC 58 [2-3] (2007) 227-230.
  20. W. Posthumus, A.J. Derksen, J.A.M. van den Goorbergh and L.C.J. Hesselmans, Crosslinking by polycarbodiimides, POC 58 [2-3] (2007) 231-236.
  21. D. Hegemann, M.M. Hossain and D.J. Balazs, Nanostructured plasma coatings to obtain multifunctional textile surfaces, POC 58 [2-3] (2007) 237-240.
  22. M. Lonyuk, M. Bosma, A.C. Riemslag, J. Zuidema, A. Bakker and M. Janssen, Stone-impact damage of automotive coatings: A laboratory single-impact tester, POC 58 [2-3] (2007) 241-247.
  23. R. Serra, M.L. Zheludkevich and M.G.S. Ferreira, Surface modification of coil coatings with thin plasma polymer films structure and stability, POC 58 [2-3] (2007) 248-252.

COSI 2005 / POC 55 [2](2006)

  1. B. de With and R.A.T.M. van Benthem, Editorial, POC 55 [2] (2006) 71-74.
  2. S.G. Croll, B.R. Hinderliter and S. Liu, Statistical approaches for predicting weathering degradation and service life, POC 55 [2] (2006)75-87.
  3. I. Alig, P.A.M. Steeman, D. Lellinger, A.A. Dias and D. Wienke, Polymerization and network formation of UV-curable materials monitored by hyphenated real-time ultrasound reflectometry and near-infrared spectroscopy (RT-US/NIRS), POC 55 [2] (2006) 88-96.
  4. M. Bosma, R. Brinkhuis, J. Coopmans and B. Reuvers, The role of sag control agents in optimizing the sag/leveling balance and a new powerful tool to study this, POC 55 [2] (2006) 97-104.
  5. S.J.F. Erich, J. Laven, L. Pel, H.P. Huinink and K. Kopinga, NMR depth profiling of drying alkyd coatings with different catalysts, POC 55 [2] (2006) 105-111.
  6. D. Ståhlberg, P. Junestam, M. Johansson and E.K. Gamstedt, Relaxation properties of particle filled coatings: Experimental study and modelling of a screw joint, POC 55 [2] (2006) 112-118.
  7. P.J.A. Geurink, T. Scherer, R. Buter, A. Steenbergen and H. Henderiks, A complete new design for waterborne 2-pack PUR coatings with robust application properties, POC 55 [2] (2006) 119-127.
  8. M. Tielemans, P. Roose, P. De Groote and J.-C. Vanovervelt, Colloidal stability of surfactant-free radiation curable polyurethane dispersions, POC 55 [2] (2006) 128-136.
  9. K. Rissa, T. Lepistö and K. Yrjölä, Effect of kaolin content on structure and functional properties of water-based coatings, POC 55 [2] (2006) 137-141.
  10. L.C.J. Hesselmans, A.J. Derksen and J.A.M. van den Goorbergh, Polycarbodiimide crosslinkers, POC 55 [2] (2006) 142-148.
  11. R.P. Klaasen and R.P.C. van der Leeuw, Fast drying cobalt-free high solids alkyd paints, POC 55 [2] (2006) 149-153.
  12. B. de Ruiter, A. El-ghayoury, H. Hofmeier, U.S. Schubert and M. Manea, Two-step curing processes for coating application, POC 55 [2] (2006). 154-159.
  13. M. Zielecka and E. Bujnowska, Silicone-containing polymer matrices as protective coatings. Properties and applications, POC 55 [2] (2006) 160-167.
  14. P. Uhlmann, L. Ionov, N. Houbenov, M. Nitschke, K. Grundke, M. Motornov, S. Minko and M. Stamm, Surface functionalization by smart coatings: Stimuli-responsive binary polymer brushes, POC 55 [2] (2006) 168-174.
  15. S. Voccia, S. Gabriel, H. Serwas, R. Jérôme and C. Jérôme, Electrografting of thin polymer films: Three strategies for the tailoring of functional adherent coatings, POC 55 [2] (2006) 175-182.
  16. C.S. McDaniel, J. McDaniel, M.E. Wales and J.R. Wild, Enzyme-based additives for paints and coatings, POC 55 [2] (2006) 182-193.
  17. B. Göbelt, Molecular weight distribution in living polymerization, POC 55 [2] (2006) 189-193.
  18. B.K. Kim, B.U. Ahn, M.H. Lee and S.K. Lee, Design and properties of UV cured polyurethane dispersions, POC 55 [2] (2006) 194-200.
  19. J.P. Stropp, U. Wolff, S. Kernaghan, H. Löffler, M. Osterhold and H. Thomas, UV curing systems for automotive refinish applications, POC 55 [2] (2006) 201-205.